Simulations for an auditorium were carried out by Fluid Codes on behalf of URS Scott Wilson. The simulation consisted of the auditorium with supply ceiling swirl diffusers and 100 floor supply diffusers with side diffusers located at the rear. Read engineering solution for this case study by Fluid Codes.

Fluid Codes carried out a CFD study for a basement Car Park to determine the optimal locations of Jet fans, as well as to determine the performance of the fans in evacuating the smoke in the event of a fire. Read engineering solution for this case study by Fluid Codes.

This simulation was carried on a Floating Roof Tank, in order to check the maximum deformation of the Guide Pole due to the lift force generated by the internal pressures while filling the tank with oil. Also the force generated by the internal mixers, which are continually rotating and generating disturbance in the fluid, were directly transmitted to the roof and later on to the Guide Pole. Read engineering solution for this case study by Fluid Codes.

Read engineering solution for Barge Stop case study conducted by Fluid Codes.

Fluid Codes’ customer wanted to investigate the Agitator Blades Failure in one of their reactors for which CFD and FEA analysis were carried out. 3D CAD models of the tank and the agitator rotor blades were generated as per the drawing provided by the client. Read engineering solution for this case study by Fluid Codes.

Computational Fluid Dynamics study for the Living Quarters Platform helipad of RasGas Alpha installation in Qatari waters was carried out in order to assess the impact of air turbulence on helicopter operations. Read engineering solution for this case study by Fluid Codes.

For the present investigation, the CFD technology was used to design a full-scale 3D model of the water entrance area of a heat Exchanger. Read engineering solution for this case study by Fluid Codes.

Computational Fluid Dynamics (CFD) modelling was carried out for a Water Pumping Station and their compartments in order to determine flow paths/flow distribution such that an economic design may be conceived and constructed. Read engineering solution.

Storage Tank can fail for several reasons of which corrosion can be the major cause. The customer wanted to validate the roof configuration for its structural integrity and also to validate the tank under a seismic load. Read engineering solutions from Fluid Codes technical team.

A CFD analysis of a manifold was performed in order to understand if there was any significant stagnant zone and low velocity regions, which are difficult to acquire from experimental techniques. Read this case study to learn more.