Smoke & Ventilation Analysis at Dubai Airport Terminal 3

The goal of this study was to design the ventilation system in the event of a fire and validate the safety and thermal comfort of Dubai Airport Terminal 3. The simulations allowed…

HVAC Simulation of Jamarat Bridge, Makkah, KSA

SBG, an internationally recognized engineering firm, was involved in the design and construction of Jamarat bridge, Mina-Makkah, Saudi Arabia.

Armoured Personnel Carrier Blast Analysis

Modern cars are designed to protect occupants in different dangerous situations like blast, crashes… Simulation tools can help engineers to predict these scenarios and design…

Silencer simulation with AUTODYN

Silencers are used to reduce noise and muzzle flash generated by firearms. FEA can give valuable insight into firearm performance during the design process and in turn…

Fatigue Analysis of Military Seat Anchorages

Seat Anchorages are one of the critical components concerning passenger safety of a military vehicle. They required to be assessed…

Design of a Pressure Vessel for Human Occupancy (PVHO)

Design of Pressure Vessel for Human occupancy (PVHO) is governed by Design codes. Finite Element Analysis plays an important role…

CFD Flow Simulation of a Water Reservoir

The reservoir tank of two identical compartments, with two inlets in each compartment and an outlet, observed severe flow short circuiting and stagnation zones. 

Smoke Extraction Analysis of a Mall

This big shopping center was in the final construction stage. It provides a complete and comprehensive shopping for the people in Dubai, UAE.

Lifting Process of a Spherical Tank

The lifting process of a spherical tank by Cylingas had to be performed without deforming its shape. Also, the safety precautions had to be taken into…

Bullet Impact Case on an Armored plate

Bullet impact test in a steel plate was solved by performing an Explicit Dynamic simulation. The goal was to check the plate material behavior under a bullet impact. 

CFD Analysis of an O&G Platform Helideck

Helicopter is the primary means of transport in offshore oil and gas platforms. The purpose of this CFD analysis was to assess the impact of the vertical air turbulence on helicopter…

Blast Analysis in a Door

Blast door capability test, under an uniform instant pressure due to the design criteria imposed by the norm, by performing an Explicit Dynamic simulation. The door had to keep…

Stress Analysis in a Pressure Vessel

Once plant equipment is in service for longer than its design so-called “design life” and operations engineers can no longer rely on codes or warranties…

External Floating Roof Tank Simulation

An oil tank with an external floating roof had an issue during filling process: the guide pole which is in contact with the roof was undergoing aggressive deformation until it touched…

Misdistribution of Fluids in a Separator

A common problem with piping systems is the misdistribution of fluids to the separator or slug catchers. This comes about because the multiphase flows with…

Mine Detonation Analysis

Analysis of a mine detonation by performing a Explicit Dynamic simulation. The goal was to quantify the scope and the projectile speed in every instant. This method is nowadays…

Nozzle -Shell Junction FE Analysis

In cases where pressure vessels or other equipment are being designed, the codes often require some details study of the nozzles and those areas under high stress conditions…

Antenna Design

ANSYS HFSS is the leader electromagnetic (EM) simulator, which provides accurate solutions for antenna design and placement. It offers an antenna design toolkit…

Model Injection of Solvent into a Piping system

In this
study CFD was used to model injection of solvent into a piping system. The goal
of the study was to verify if mixing would be achieved at certain…

Antenna Placement on an Aircraft

ANSYS HFSS provides accurate solutions regarding the performance of antennas, both as components and when integrated into an operating environment such as…

Heat Exchanger CFD Analysis

CFD analysis was carried out for a heat exchanger at working conditions. Inflows of clean and non-clean water were solved in order to predict…

Smoke Visibility Study For Car Park

The
ventilation system should inject an even amount of air across the car park in
order to push the smoke plume downstream
of the fire and enable…

Fire Analysis in a Tunnel

Introducing ventilation system by injecting an air along the tunnel with certain velocity (critical velocity) is a vital task as that should justify the criteria of effective…

Storage Tank Seismic Analysis

Storage Tanks are common components of petrochemical industry. Failure of tank can have several undesirable effects such as endangering personnel…

Close Menu